8(65)
1.1 Coding Principle
Notes*
D=Dual-heating Zones PW=Medium is Water with High Temp.
HPW=Medium is Water with High Temperature and High Pressure
CE=CE Conformity B=Buzzer
1.2 Feature
1) Standard configuration
● Controller adopts 3.2" LCD for easy operation.
● Equipped with the design of 7-day automatic start/stop timer. LCD screen
can be converted between Chinese and English. The unit of temperature
can be converted between
o
F and ℃.
● P.I.D. multi-stage temperature control system can maintain a mould
temperature with accuracy of ±0.5℃.
● Adopts high efficiency water cycle pump, which can meet the demands of
temperature control for precise moulds and mould loop with minor diameter
to achieve precise temperature control and high efficient heat exchange.
Pump inside adopts stainless steel to avoid explosion.
● Multiple safety devices including power reverse phase protection, pump
overload protection, overheat protection and low level protection that can
automatically detect abnormal performance and indicate this via visible
alarm.
● While for STM-PW, it can reach 160.℃
● Equipped with high pressure protection, safety pressure relieving, automatic
water supplying and air exhausting.
To Next Page
Loading...
Need help?
General
