9(65)
● STM-PW adopts indirect cooling, which makes temperature control more
precise. The low viscosity of water realizes fast heat exchange.
● STM-PW series adopts magnetic pump with stable performance and no
leakage, suitable for applications which need long time heating and
temperature maintaining.
2) Accessory option
● Water manifolds and Teflon hose are optional.
● RS485 communication function is optional.
● Display of mould temperature and mould return water temperature is
optional.
All service work should be carried out by a person with technical training or
corresponding professional experience. The manual contains instructions for both
handling and servicing. Chapter 6, which contains service instructions intended for
service engineers. Other chapters contain instructions for the daily operator.
Any modifications of the machine must be approved by SHINI in order to avoid
personal injury and damage to machine. We shall not be liable for any damage
caused by unauthorized change of the machine.
Our company provides excellent after-sales service. Should you have any problem
during using the machine, please contact the company or the local vendor.
Headquarter and Taipei factory：
Tel: (886) 2 2680 9119
Shini Plastics Technologies (Dongguan), Inc：
Tel: (86) 769 8111 6600
Shini Plastics Technologies India Pvt.Ltd.：
Tel: (91) 250 3021 166
To Next Page
Loading...
Need help?
General
