7(65)
1. General Description
Read this manual carefully before operation to prevent damage of the
machine or personal injuries.
STM- PW/HPW series high temperature water heater are used to heat up the
mould and maintain temperature, although they can be used in other similar
applications. High temperature water from the mould is returned to the cooling
tank and cooled by either indirect cooling ( For high temperature models ) or direct
cooling ( for standard models ). It is then pressurised by the high-pressure pump,
sent to the heating tank and finally to the mould with a constant temperature. The
HANYOUNG temperature controller can maintain an accuracy of ±0.5℃.
Model: STM-607PW
To Next Page
Loading...
Need help?
General
