Shinkawa VM-5 User Manual

7. UNIT INSTALLATION VM-5G
-12-
7-1 UNIT INSTALLATION
• Make sure to turn off the power.
• Failure to turn off the power before pulling the monitor unit out of the instrument rack
will result in serious damage and accidents.
1) Evenly loosen the knurled screw at the top and bottom of face plate.
• Tighten the screw by hand. Do not use any tools.
2) Pull out the monitor unit.
• Make sure not to touch the chassis.
Mandatory
Caution
Prohibition
Prohibition

Shinkawa VM-5 Specifications

General

Brand	Shinkawa
Model	VM-5
Category	Analytical Instruments
Language	English