Need help?Do you have a question about the Shinko PC-935 series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Type | Programmable Controller |
| Input Voltage | 100-240V AC |
| Output Type | Relay |
| Programming Language | Ladder Logic |
| Communication Ports | RS-232, RS-485 |
| Storage Temperature | -20 to 60°C |
Details system configuration options for the PC-900.
Describes the specifications and characteristics of communication interfaces.
Wiring details for RS-232C communication.
Wiring details for RS-485 communication.
Wiring for setting value digital transmission.
Covers essential setup procedures for the PC-900 unit.
Explains the sequence of communication between master and slave devices.
Details the structure and composition of communication commands.
Explains how to calculate the checksum for communication.
Provides important notes regarding setting and reading commands.
Lists available commands and their parameters.
Lists sample programs for communication examples.
Step-by-step guide to operating sample programs.
Important considerations for inputting commands correctly.
Lists the technical specifications of the communication system.
Provides guidance for resolving communication failures and errors.
Displays the ASCII character encoding table.
To Next Page
