Shinko BCD2R - User Manual

1
OGRANICZNIKI I BEZPIECZNIKI TEMPERATURY BCD2R, T7672
BCD2R,T7672
BCD23T7672E1 2016.02
To prevent accidents arising from the misuse of this controller, please ensure the operator receives this manual.
Safety precautions (Be sure to read these precautions before using our products.)
The safety precautions are classified into categories: “Warning” and “Caution”. Depending on circumstances,
procedures indicated by Caution may result in serious consequences, so be sure to follow the directions
for usage.
Warning
Warning
• To prevent an electric shock or fire, only our or other qualified service personnel may handle the inner
assembly.
• To prevent an electric shock, fire or damage to the instrument, parts replacement may only be undertaken
by our or other qualified service personnel.
Safety precautions
• To ensure safe and correct use, thoroughly read and understand this manual before using this instrument.
• This instrument is intended to be used for industrial machinery, machine tools and measuring equipment. Verify
correct usage after purpose-of-use consultation with our agency or main office. (Never use this instrument for
medical purposes with which human lives are involved.)
• External protection devices such as protection equipment against excessive temperature rise, etc. must be
installed, as malfunction of this product could result in serious damage to the system or injury to personnel.
Proper periodic maintenance is also required.
• This instrument must be used under the conditions and environment described in this manual. Shinko Technos
Co., Ltd. does not accept liability for any injury, loss of life or damage occurring due to the instrument being used
under conditions not otherwise stated in this manual.
Caution with respect to Export Trade Control Ordinance
To avoid this instrument from being used as a component in, or as being utilized in the manufacture of weapons of
mass destruction (i.e. military applications, military equipment, etc.), please investigate the end users and the final
use of this instrument. In the case of resale, ensure that this instrument is not illegally exported.
Caution
• This instrument should be used according to the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause a fire.
• Be sure to follow the warnings, cautions and notices. If they are not observed, serious injury or malfunction
may occur.
• Specifications of the BCD2 and the contents of this instruction manual are subject to change without notice.
• Measures must be taken to ensure that the operator cannot touch power terminals or other high voltage
sections.
• Be sure to turn the power supply to the instrument OFF before cleaning this instrument.
• Use a soft, dry cloth when cleaning the instrument.
(Alcohol based substances may tarnish or deface the unit.)
• As the display section is vulnerable, do not strike or scratch it with a hard object.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• Shinko Technos Co., Ltd. is not liable for any damages or secondary damages incurred as a result of using
this product, including any indirect damages.
Caution
Procedures which may lead to dangerous conditions and cause death or serious
injury, if not carried out properly.
Procedures which may lead to dangerous conditions and cause superficial to medium
injury or physical damage or may degrade or damage the product, if not carried out
properly.

Summary

General Safety Precautions

Understanding Warning and Caution Levels

Defines 'Warning' and 'Caution' levels and their implications for safe operation.

Control Panel Overview

Components and Their Functions

Identifies and describes the purpose of each indicator, display, and button on the controller's front panel.

Mounting and Installation

Site Selection and Environmental Conditions

Wiring and Connections

Wiring Safety Warnings and Notices

Essential safety precautions and notices to prevent electrical shock during wiring.

Settings Configuration Overview

Operation Flowchart for Settings

Visual guide outlining the sequence for setting input type, alarms, and desired values.

Parameter Settings

Setup Mode Parameter Configuration

Comprehensive list of parameters adjustable in Setup mode, including input type, scaling, and alarms.

Setting Modes: Main and Sub

Main Setting Mode: SV and Alarm Values

Sub Setting Mode: Lock, Correction, Comms

System Setup Mode: Inputs and Scaling

Input Type Selection and Scaling Limits

How to select input types (thermocouple, RTD, DC) and define scaling high/low limits.

System Setup Mode: Alarms and Control

Alarm Type, Hysteresis, and Delay Settings

Configuring alarm actions, hysteresis levels, and delay times for A1 and A2 outputs.

Limit Control and Output Hysteresis

Operation and Initial Start-up

Power On and Basic Operation Steps

Control Action Behavior

High Limit Control Action Explanation

Detailed explanation and graphical illustration of the high limit control action sequence.

Control Action Behavior Details

Low Limit Control Action Explanation

Detailed explanation and graphical illustration of the low limit control action sequence.

Auto vs. Manual Limit Control Modes

Alarm and Output Action Diagrams

A1 and A2 Alarm Output Configurations

General Product Specifications

Standard Specifications Summary

Lists key specifications including accuracy, input sampling, output capabilities, and electrical ratings.

Troubleshooting Common Issues

Resolving Display Indication Problems

Troubleshooting: Operation and Control

Addressing Key Operation Errors

Diagnosing Control Performance Issues

Shinko BCD2R Specifications

General

Brand	Shinko
Model	BCD2R
Category	Controller
Language	English