Need help?Do you have a question about the Shiv S-works and is the answer not in the manual?
General| Frame | FACT 11r carbon |
|---|---|
| Fork | FACT carbon |
| Front Derailleur | Shimano Dura-Ace Di2 |
| Rear Derailleur | Shimano Dura-Ace Di2 |
| Cassette | Shimano Dura-Ace, 11-speed |
Highlights safety warnings, torque specifications, and proper tool usage for installation.
Instructions for preparing the frame's bottom bracket shell and general care for carbon frames.
Guidance on inspecting and preparing the fork and stem for installation, focusing on burrs and edges.
Steps to prepare the seat tube and seatpost surfaces for proper fit and to avoid damage.
References to additional guides, manuals, and videos for further instructions.
Details on warranty provisions and where to find complete information.
Visual guide and detailed measurements for various frame sizes.
Lists and illustrates hardware components, including risers, bolts, and brackets, with quantities.
Step-by-step instructions for installing the fork into the frame's head tube and steerer tube.
Detailed steps for mounting the carbon aero handlebar onto the specialized aero stem.
Procedures for installing an alloy handlebar with a standard 31.8mm stem and expander plug.
Guide to installing handlebar extension risers for height adjustment, including a riser chart.
Steps for attaching handlebar clamps, extensions, and arm pads, with depth range considerations.
Instructions for fine-tuning extension and arm pad positions for optimal rider fit.
Guidance on routing front and rear brake cable housings and shifter wires through the handlebar.
Steps for routing derailleur cables and electronic wires at the bicycle's bottom bracket.
Specific information regarding the routing and connection points for Di2 electronic wiring.
Instructions for fitting the cable routing cover plate, securing wiring and housing.
Steps to install the cable routing control tower based on spacer configuration.
Exploded view and component list for front and rear brake assemblies.
Detailed instructions for assembling and mounting the front brake calipers.
Detailed instructions for assembling and mounting the rear brake calipers.
Steps for proper adjustment of both front and rear brake assemblies for optimal performance.
Comprehensive guide for installing and adjusting the Shiv seatpost, including clamp mechanisms.
Explanation of the different seatpost setback options and their adjustment.
Step-by-step instructions for installing the integrated hydration system (Fuelselage).
To Next Page
