To Next PageTo Next Page
Need help?Do you have a question about the Shop fox W1831 and is the answer not in the manual?
Provides contact details for Woodstock International Technical Support.
Explains potential differences between manual and machine, and where to find updates.
Explains safety symbols and the operator's responsibility for safe use.
General safety guidelines for operating machinery.
Specific safety precautions for operating spindle sanders.
Details the necessary power supply circuit specifications for safe operation.
Guidelines for polarized plugs and safe use of extension cords.
Instructions for safely unpacking and checking machine components.
Guidance on location selection and initial machine cleaning procedures.
Describes methods for securely mounting the machine to a workbench.
Steps for assembly and importance of dust collection system.
Procedure for testing the machine's operation after setup.
Introduces operations and safety for inexperienced users.
Explains how to disable the switch for safety and prevent unauthorized use.
Step-by-step guide for installing or replacing sanding drums and sleeves.
Instructions on how to properly sand a workpiece using the machine.
Lists available accessories for the spindle sander and where to find them.
Outlines a maintenance schedule including before/after use and monthly tasks.
Detailed instructions for cleaning the machine, including the table.
Introduces service procedures and provides contact info for further assistance.
Instructions for replacing worn motor brushes.
Detailed procedure for replacing timing belts.
Table of common problems, their possible causes, and corrective actions.
Visual representation of the machine's electrical connections and components.
Exploded view diagram showing the machine's components.
Detailed list of all parts with reference numbers and descriptions.
Information about safety labels and their importance for machine operation.
Details the product warranty terms, conditions, and limitations.
General
