SHOWTEC Pixel bar 12 - Function Modes; Built-in Programs Mode; Auto Run Program Mode

13
Main Menu Options
1. Built-in Programs
2. Auto Run Program
3. DMX address
4. Slave
5. Sound-controlled
6. Static Color
Function Modes
1. Built-in Programs Mode
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the built-in programs of the Pixel Bar 12.
You can select 35 different Programs when using the Pixel Bar 12.
3) Press Setup to enter the AUTO Menu. You can choose 2 different sub menus.
Speed from 01-99 and FL
Flash Frequency from 00-99
Use the SETUP button to scroll through the menu.
2. Auto Run Program
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Pixel Bar 12.
3) Press Setup to enter the AUTO Menu. You can choose 2 different sub menus.
Speed from 01-99 and FL
Flash Frequency from 00-99
Use the SETUP button to scroll through the menu.