Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Pixel Bar 12 is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the Pixel Bar 12, with the mounting-bracket, to the trussing system.
The Pixel Bar 12 must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the Pixel Bar 12, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property !
To Next Page
Loading...
Need help?
General
