Shure AXT400 User Manual

Shure Incorporated
5/22
•
•
•
•
•
•
•
•
RF Cascade Ports
The cascade ports share RF signal with up to 5 receivers within the same frequency band. RF cascade allows antenna signal
to be conveniently distributed for up to 10 channels without using splitters or distribution amplifiers.
Compatible Transmitters
The receiver is compatible with the following Shure transmitters:
AXT100 Bodypack Transmitter
AXT200 Frequency Diversity Handheld Transmitter
UR1 Bodypack Transmitter
UR1H Bodypack Transmitter
UR1M Micro-Bodypack Transmitter
UR2 Handheld Transmitter
MW2 Handheld Transmitter
MW3 Handheld Transmitter
Included Components
1-foot Coaxial Cascade Cable (2) 95N2035
IEC AC Power Cable (1) 95A9128
IEC AC Extension Cable (1) 95A9129
Shielded 3-foot Ethernet Cable (1) C803
Shielded 8-inch Ethernet Jumper Cable (1) C8006
Hardware Kit (1) 90XN1371
22-inch Coaxial Cable* (1) 95B9023
33-inch Coaxial Cable* (1) 95C9023
* with integrated bulkhead for front mounting antennas.
Mounting Instructions
This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to the rack.

Shure AXT400 Specifications

General

Brand	Shure
Model	AXT400
Category	Receiver
Language	English