Shure Incorporated
16/22
◦
5.
6.
◦
◦
◦
1.
2.
Turn the control wheel to select the transmitter in slot 1 or slot 2 before pressing Sync.
When a transmitter is successfully linked, a confirmation is displayed and the link status icon appears to the left of the
channel name on the receiver home menu. Link status is not maintained with UHF-R series transmitters.
Transmitters can be unlinked from the channel, clearing the link relationship.
From the home screen menu, select Tx
Turn the control wheel to select the device ID of the transmitter to be unlinked
Press the Unlink menu option or link another transmitter to overwrite the selected link slot
Frequency Diversity
Frequency Diversity uses two independent radio frequencies sent from an AXT200 handheld transmitter or from two AXT100
bodypack transmitters connected with a "Y" cable to deliver a single uninterrupted audio channel. To optimize performance,
Frequency Diversity mode must match the transmitter type.
To set Frequency Diversity mode:
Menu: Options > Diversity
Turn the control wheel to select FD-Bodypack for AXT100 bodypack transmitters or to select FD-Handheld for AXT200
handheld transmitters.
Specifications
Specifications AXT400 Receiver
RF Carrier Frequency Range
470–952 MHz
Note: varies by region
Working Range
Under typical conditions 150 m (500 ft)
Line of Sight, outdoors for a single system 500 m (1600 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.
Audio Frequency Response
40 Hz
– 18 kHz (+1, -3 dB)
Note: Dependent on microphone type
RF Tuning Step Size
25 kHz
Modulation
45 kHz max. deviation
FM, Audio Reference Companding with pre- and de-emphasis
To Next Page
Loading...
