Shure GLXD6 - Indicator: Needle or Strobe; Choosing Live or Mute Audio Output

Shure Incorporated
20/33
Indicator: Needle or Strobe
The tuner indicator can be set to display a needle style or strobe style.
Needle
A single LED will illuminate on the tuning bar to indicate sharp or flat. The green center LED will illuminate when the note is in
tune.
Strobe
A sequence of three LEDs will travel across the tuning bar in the direction of sharp or flat. The LEDs will remain stationary
when the note is in tune.
Note: Indicator and Output settings are displayed in a scroll from left to right.
Choosing Live or Mute Audio Output
The following modes are available to set the audio output to Live or Mute when the footswitch is pressed in tuner mode.
Note: Text for the output settings are displayed in a scroll from left to right.
Mode Footswitch Function
Live Receiver Display (audio Live) ↔ Tuner Display (audio Live)
Mute Receiver Display (audio Live) ↔ Tuner Display (audio Mute)
Both Tuner Display (audio Mute) ↔ Tuner Display (audio Live)*
*Note: In Both mode, the pedal powers up in Receiver Display. Press the footswitch to enter tuner mode.