Shure GLXD6 - Using a Third-Party Power Supply

Shure Incorporated
24/33
•
•
Using a Third-Party Power Supply
To power your GLXD6 wireless receiver pedal, we recommend using the included power supply or a power supply with isolated
power outputs.
If using a power supply with isolated power outputs, use a power outlet rated at a minimum of 250 mA.
However, if using other third-party power supplies:
Check the power consumption for each pedal in a daisy-chain setup. You must know the total power consumption for all of
your pedals to avoid overloading the power supply.
If no power requirement is listed on the pedal, consult the pedal manufacturer.