Shure Incorporated
6/33
Accessories
Included Components
Shure Rechargeable Battery SB902A
Micro USB Battery Charger SBC10-USB
Power Supply PS24
Premium Guitar Cable WA305
Quick Start
To reduce set up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered
on and never have to be linked again.
Note: If using multiple effects pedals, place the receiver pedal first in the signal chain.
Step ① Connect power supply to the receiver and plug the power cord into an AC power source.
Step ② Connect the transmitter to the instrument and turn on the transmitter.
Step ③
Connect receiver audio output to an amplifier or mixer. Turn on the receiver: The blue rf LED
will flash while the transmitter and receiver form a link. When the link has successfully
formed, the rf LED will remain illuminated.
Note: The transmitter and receiver will remain linked for future usage. At power-up, the blue rf LED will illuminate,
skipping the linking step.
Step ④ Check the audio and adjust the gain if necessary.
To Next Page
Loading...
