Shure Incorporated
41/103
③ Networked Charging Station (NCS)
Connect the PS60 external power supply from the charger to an AC power source. Turn on the power switch.
Fully Charge the Transmitters
Whenever possible, charge to full the MXW transmitters before an event. Transmitters can be charged in any networked charg
ing station, even if it is associated to another Group or on a separate network.
Battery Charge Times
Approximate Charge Times
Charger Type Time to Full Charge* (hr:min)
Networked Charging Station (NCS) 2:00
Networked Charging Station (NCS) in High Efficiency
Mode (Link LED illuminated blue)
4:00
USB Charger
Powered On = 3:30
Powered Off = 2:30
*Calculated with a new battery. Runtimes vary depending on battery health.
Open the MXW Control Software
Access the MXW control software from any computer on the MXW network. The software is hosted from a webserver embed
ded in the MXW devices, and operates using Adobe Flash .
® ®
To Next Page
Loading...
Need help?
General
