Shure Incorporated
2/60
QLX-DWireless System 4
IMPORTANT SAFETY INSTRUCTIONS 4
WARNING 5
Important Product Information 5
LICENSING INFORMATION 5
Information to the user 6
Australia Warning for Wireless 6
System Overview 6
Features 6
System Components 7
Quick Start 8
Step 1: Power and Antenna Connection 8
Step 2: Scanning for the Best Available Channel 9
Step 3: Install Batteries into Transmitter 10
Step 4: IR Sync to Create an Audio Channel 10
Step 5: Sound Check and Gain Adjustment 11
Wearing the Bodypack Transmitter 11
Hardware Interface 11
Receiver Front and Back Panels 12
Receiver Display 14
Navigating the Receiver Menus 15
Transmitters 17
Transmitter Display 19
Transmitter Menu Options and Navigation 20
Control Lock Options for the Receiver and Transmitter 21
Battery Installation 22
Setting the AA Battery Type 23
AA Battery Installation 24
Shure SB900 Rechargeable Battery 24
Low Battery Alert 26
Receiver Gain Adjustment 26
Audio Signal Encryption 26
System Set Up 27
Creating Audio Channels 28
Scan and IR Sync 28
Step 1: Scanning to Find the Best Channel 28
Network Scan 28
Step 2: IR Sync for Automatic Transmitter Set Up 29
Manual Group and Channel Assignment 29
Manual Frequency Selection 30
Linking Two Transmitters to a Receiver 30
Radio Frequency (RF) Settings 31
Setting the Transmitter RF Power 31
Shure AXT600 Spectrum Manager Compatibility 32
Using QLX-D with a Shure ULX-D System 32
Setting Regional TV Channel Spacing 32
Custom Groups 33
Networking 34
Connecting to a Network 34
Automatic IP Addressing 34
Configuration Tips 34
Network Troubleshooting 35
Setting the IP Address and Subnet Mask Manually 35
Connecting to an External Control System 36
Managing Your System with Shure Software 36
Firmware Updates 36
Firmware Versioning 37
To Next Page
Loading...
Need help?
General
Weight and Dimensions
