Shure QLXD2 - Footpads and Output Connectors

60 pages

Save Page as PDF

To Next Page

To Previous Page

Shure Incorporated

42/60

Installing Footpads

Receiver Output Connectors

Transmitter Input

① Ground

Main Page

Table of Contents2
QLX-Dwireless System4
Important Safety Instructions4
Warning5
Important Product Information5
- Licensing Information5
- Information to the User6
- Australia Warning for Wireless6
System Overview6
- Features6
- System Components7
Quick Start8
- Step 1: Power and Antenna Connection8
- Step 2: Scanning for the Best Available Channel9
- Step 3: Install Batteries into Transmitter10
- Step 4: IR Sync to Create an Audio Channel10
- Step 5: Sound Check and Gain Adjustment11
Wearing the Bodypack Transmitter11
Hardware Interface12
- Receiver Front and Back Panels12
- Receiver Display14
- Navigating the Receiver Menus15
- Transmitters17
- Transmitter Display19
- Transmitter Menu Options and Navigation20
- Control Lock Options for the Receiver and Transmitter21
Battery Installation23
- Setting the AA Battery Type23
- AA Battery Installation24
- Shure SB900 Rechargeable Battery24
- Low Battery Alert26
Receiver Gain Adjustment26
- Audio Signal Encryption26
System Set up28
- Creating Audio Channels28
- Scan and IR Sync28
- Step 1: Scanning to Find the Best Channel28
- Network Scan28
- Step 2: IR Sync for Automatic Transmitter Set up29
- Manual Group and Channel Assignment29
- Manual Frequency Selection30
- Linking Two Transmitters to a Receiver30
Radio Frequency (RF) Settings31
- Setting the Transmitter RF Power31
- Shure AXT600 Spectrum Manager Compatibility32
- Using QLX-D with a Shure ULX-D System32
- Setting Regional TV Channel Spacing32
- Custom Groups33
Networking34
- Connecting to a Network34
- Automatic IP Addressing34
- Configuration Tips34
- Network Troubleshooting35
- Setting the IP Address and Subnet Mask Manually35
Connecting to an External Control System36
Managing Your System with Shure Software36
Firmware Updates37
- Firmware Versioning37
- Downloading and Updating Firmware37
- Updating the Receiver37
- Updating the Transmitter37
Troubleshooting38
- Error Codes and Solutions40
Single and Dual Rackmount Assembly41
- Securing the AC Power Cord41
- Installing Footpads42
- Receiver Output Connectors42
- Transmitter Input42
Accessories43
- Optional Accessories43
Specifications49
- Qlxd451
- Qlxd152
- Qlxd253
- Frequency Range and Transmitter Output Power54
Frequencies for European Countries55
Certifications59
- Qlxd1, Qlxd2, Qlxd459
- Qlxd1, Qlxd260
- Qlxd460

Shure QLXD2 - Footpads and Output Connectors

Table of Contents

Other manuals for Shure QLXD2

Related product manuals