Shure SLX-D Quick Start Guide

Shure Incorporated
9/15
3.
4.
1.
2.
3.
Connect the audio output to an amplifier or mixer.
Press the power button on the receiver. Use the menu to set the system to microphone (mic) or instrument (line) level
as appropriate.
Install Transmitter Batteries
Important: To avoid damaging transmitters, only use Shure SB903 Li-ion rechargeable batteries or 1.5V AA batteries.
Bodypack:
Push the tab up and open the battery door to access the battery compartment.
Place a Shure SB903 Li-ion rechargeable battery or 2 AA batteries in the compartment.
Close the battery door.

Shure SLX-D Specifications

General

Audio Frequency Response	20 Hz to 20 kHz
Encryption	256-bit AES
Battery Life	Up to 8 hours
System Type	Digital Wireless
Transmitter Type	Handheld, Bodypack
Total Harmonic Distortion	<0.02%
Latency	3.2 ms
Operating Range	Up to 100 meters (328 feet)
Dynamic Range	> 120 dB
Number of Channels	Up to 32 per band
Modulation	Digital
RF Sensitivity	-97 dBm for 12 dB SINAD