Sic Marking i143 - Use of the Machine; Safety Precautions; Controller Reference; Software Reference

NOTI143US - R00.doc Translation of the original instructions 9/25
USE OF THE MACHINE
1. SAFETY
2. CONTROLLER
See controller manual
3. SOFTWARE
See software manual
An intense use may cause the temperature of the
system to rise up to 100°C.
It is recommended to wear safety glasses.
It is also recommended to wear a noise reducing
helmet.
Acoustic value of the machine : 76 dB on a piece of
steel at medium speed
The marking system should never be used without any
surface to mark as the marking head may break.