Indication of the alignment quality
T
able 6: Indication of the alignment quality
LEDs Meaning
Alignment quality light emitting
diode
s
OSSD
1 2 3 4
o o o o O R
ed
Alignment is insufficient or the protec‐
t
ive field is interrupted at least partially.
The receiver cannot synchronize with the
sender.
O Blue o o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O R
ed
Alignment is insufficient or the protective
f
ield is interrupted at least partially.
O Blue O Blue o o O Gr
een
Alignment is not yet sufficient for stable
a
vailability.
O Blue O Blue O Blue o O Gr
een
Alignment is good, stable availability.
1)
O Blue O Blue O Blue O Blue O Gr
een
Alignment is very good.
o LED of
f. Ö LED flashes. O LED illuminates.
1)
If the protective fields are very wide, there is a possibility that all four alignment quality LEDs will not light
up even when alignment is good.
7.4 Check during commissioning and modifications
The thorough check is intended to ensure that the safety functions are fulfilling their
planned pur
pose and whether persons are being adequately protected.
b
Carry out the checks specified in the test plan of the manufacturer of the machine
and the operating entity.
7 C
OMMISSIONING
44
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes 8024467/1GWF/2022-11-11 | SICK
Subject to change without notice