SICK deTec4 C4C-EV03030A10000

DANGER
H
azard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
The safety light curtain can only be mounted to machines on which the protective
field width does not change when the safety light curtain is switched on.
DANGER
H
azard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
The end with the cable connection must point in the same direction for the sender
and receiver.
180˚
r
s
r
s
Figure 22: Sender and receiver must not be installed such that they are rotated 180° relative to
e
ach other
Prerequisites
•
Pr
oject planning is completed.
•
Assembly is carried out according to the project planning.
•
Dangerous condition of the machine is and remains switched off during mounting.
•
The outputs of the device do not affect the machine during mounting.
Notes on mounting
b Mount t
he sender and receiver on a level surface. (1)
MOUNTING 5
8024467/1GWF/2022-11-11 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes
33
Subject to change without notice