Need help?Do you have a question about the SICK Dx35 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | Dx35 |
| Category | Accessories |
| Language | English |
Specifies application limitations for NFPA79.
Warning about radiation exposure from incorrect controls or procedures.
Details on the purpose and audience of the operating instructions.
Explains warning symbols and their meanings (Danger, Warning, Caution, Notice).
Outlines the manufacturer's liability regarding product use and potential damages.
Lists the included components and documentation with the product.
Provides contact information for technical assistance and support.
Information on how to access the EC declaration of conformity online.
Refers to disposal instructions for the product.
Specifies the proper application of the distance sensors.
Describes prohibited uses and potential dangers of misuse.
Outlines necessary qualifications for safe operation and maintenance.
Explains the laser class warning symbols present on the device.
General safety notes and hazards to be aware of during operation.
Specific warnings regarding laser radiation and safe handling.
Explains the information found on the device's type label.
Details the structure and meaning of the product's type code.
Describes the physical components and layout of the distance sensor.
Explains the meaning of the Q1/Q2 status LEDs.
Describes the function of the general status indicator LED.
Explains the LED indications during teach-in procedures.
Details the function of the device's control buttons.
Explains the operational modes and capabilities of the distance sensors.
Provides instructions and warnings for safe transportation of the sensor.
Guidelines for checking the delivery for completeness and damage.
Specifies the conditions required for proper storage of the sensor.
Instructions for correctly aligning DL and DR models with reflective tape.
Details on using the alignment aid for infrared sensor models.
Steps for fine-tuning the sensor alignment using LEDs.
Safety precautions related to electrical connections and power supply.
Important notes and recommendations for proper wiring.
Step-by-step guide to electrically connect the sensor.
Specific connection diagram for DT35 and DL35 models.
Specific connection diagram for DS35 and DR35 models.
General notes and prerequisites for performing teach-in procedures.
Step-by-step guide for performing a one-point teach.
Step-by-step guide for performing a window teach.
Continues instructions for window teach, including inverted behavior.
Further steps for window teach procedure.
Instructions for setting up the Object between Sensor and Background (ObSB) mode.
How to scale the analog output for the Q2 sensor.
Example of scaling the analog output for 4-20 mA.
Instructions for performing fine adjustments to teach points.
How to set the operating speed of the sensor.
Overview of functions configurable via expert mode.
Steps to reset the sensor to its factory default settings.
Information on performing teach functions using external signals.
Details the physical layer specifications of the IO-Link interface.
Describes the structure and content of the sensor's process data.
Information about service data parameters.
Lists IO-Link specific service data parameters.
Details SICK-specific parameters for sensor outputs.
SICK-specific parameters related to sensor performance.
SICK-specific parameters for teach functions.
SICK-specific parameters for process data configuration.
SICK-specific parameters for general settings.
Command for system operations like resetting parameters.
Reference for error codes.
Configures the output for signal level warning via IO-Link.
Configures the output for alarm signals (no measurement) via IO-Link.
Details on performing centering teach for windows or analog output.
Explains the teach confirmation function via MF input.
Instructions for cleaning the sensor housing and front screen.
Details the required maintenance work and intervals.
Provides detailed physical dimensions and diagrams of the sensor.
Technical specifications related to the laser source and optics.
Key performance metrics like measuring range, resolution, and accuracy.
Specifications for the sensor's power supply requirements.
Information on the sensor's input capabilities.
Specifications for the sensor's output signals (switching and analog).
Details the supported data interfaces, primarily IO-Link.
Environmental operating and storage conditions for the sensor.
Information on the sensor's mechanical design and construction.
Graphs illustrating sensor repeatability under different conditions.
Repeatability diagrams specific to DT35 and DS35 models.
Repeatability diagrams for DL35 and DR35 models.
Information on available cables and connectors for the sensor.
Details of the straight cable socket accessory.
Details of the angled cable socket accessory.
Details of the plug-socket connection cable accessory.
Accessories for mounting the sensor.
Details of the mounting bracket accessory.
Details of the alignment bracket accessory.
Details of universal bar clamp mounting systems.
Accessories for reflection and alignment.
Details of the reflector plate accessory.
Details of the reflective tape accessory.
Accessory for IO-Link communication.
To Next Page