Need help?Do you have a question about the SICK DME4000 and is the answer not in the manual?
General| Laser wavelength | 650 nm |
|---|---|
| Protection class | IP65 |
| Storage temperature | -20 °C to +70 °C |
| Housing material | Aluminum |
| Laser class | Class 1 |
| Ambient temperature | -10 °C ... +50 °C |
| Interface | SSI |
Explains symbols and abbreviations used in the manual.
Details the information found on the device's type plate.
Specifies the intended use and limitations of the sensor.
Outlines essential safety precautions for operating the device.
Provides critical warnings related to laser safety and classification.
Details UL certification and related usage information.
Explains the principle of operation for the distance measuring sensor.
Describes the layout of the device's control panel and display.
General information on operating the device.
Details the components and display of the control panel.
Explains the meaning and display of various status indicators.
Refers to a flowchart illustrating the device's menu structure.
Provides detailed explanations for menu items and parameters.
Details the configuration and operation of the SSI interface.
Explains the coding options for the SSI interface.
Describes the operational modes for the SSI interface.
Explains how to activate the SSI and RS 422 interfaces.
Describes the monitor function for the serial interface.
Details the PROFIBUS interface settings and profiles.
Explains the configuration and settings for the Hiperface interface.
Sets the Hiperface address for the device.
Configures the baud rate for the Hiperface interface.
Specifies data format settings for Hiperface.
Configures timeout settings for the Hiperface interface.
Describes the monitor function for the Hiperface interface.
Sets the period length for Hiperface.
Details the configuration and settings for the RS 422 interface.
Explains DeviceNet configuration settings like baud rate and address.
Details CANopen settings including baud rate and Node-ID.
Configuration for serial communication, including baud rate and data format.
Configuration of the multifunctional input/output MF1.
Configures MF1 as a distance switching output.
Configures freely settable status messages for the sensor.
Configures the speed function for outputs MF1 and MF2.
Configuration of the multifunctional output MF2.
Sets the resolution for all interfaces.
Configuration and notes regarding the offset parameter.
Configuration for monitoring measured values for plausibility.
Instructions for mounting the DME4000 and reflector.
Step-by-step guide for aligning the sensor and reflector.
Guidelines for spacing multiple sensors to avoid interference.
Spacing requirements for sensors with data transmission.
Diagrams and notes for connecting the DME4000 electrically.
General notes and key for wiring cables.
Instructions for connecting PROFIBUS terminators.
Step-by-step guide for entering parameters using the code entry method.
Provides detailed dimensional drawings of the DME4000.
Electrical connection diagrams for various DME4000 variants.
Lists available accessories for the DME4000.
Details available reflectors with their specifications.
Lists available plugs and cables for different interfaces.
Describes mounting brackets and kits for the DME4000.
Details the weather-protecting hood accessory.
Describes the corner mirror accessory.
Technical specifications for the DME4000-1xx series.
Technical specifications for the DME4000-2xx series.
Technical specifications for the DME4000-3xx series.
Lists common problems, causes, and remedies for the DME4000.
Defines technical terms used in the manual.
Explains the PROFIBUS interface, its setup, and characteristics.
Details the RS 422 interface for serial data transmission.
Explains the SSI interface and its data transmission methods.
Describes the DeviceNet field bus system and its connection.
Explains the Hiperface interface for motor feedback systems.
Details CANopen settings and specifications.
Explains the preset function for automated initialization.
Details PROFIBUS profiles and their advantages.
Defines data formats for Slave to Master communication in PROFIBUS.
Defines data formats for Master to Slave communication in PROFIBUS.
Details diagnosis data structures for PROFIBUS.
Explains PROFIBUS error messages and their solutions.
Guide for starting up DME4000 with PROFIBUS using Siemens Step 7.
Explains how to activate and use the sleep mode function.
Details the RS-422 interface for serial data transmission.
Defines the protocols for RS-422 data transmission.
Lists commands for RS-422 communication.
Provides examples of RS-422 commands.
General information and configuration of the DeviceNet interface.
Describes data exchange parameters for DeviceNet.
Explains the Polled Mode for DeviceNet data exchange.
Explains the Change of State Mode for DeviceNet.
Details parameter offset and preset operations in DeviceNet.
Explains how to activate sleep mode via DeviceNet.
Instructions on how to save parameters in the DME4000 via DeviceNet.
How to read additional diagnostic data via DeviceNet.
Details the Hiperface interface and its commands.
Details type-specific settings for Hiperface.
Lists and explains supported Hiperface commands.
Lists and describes Hiperface status messages.
Details data transmission methods for CANopen.
Explains how measuring values are output via CANopen.
Details the configuration process for CANopen.
Lists parameters configurable via CANopen SDO service.
Instructions for permanently storing CANopen parameters.
How to read additional diagnostic values via CANopen.
To Next Page