SICK DME4000

Chapter 9 Operating Instructions
DME4000
120 © SICK AG • Germany • Subject to change without notice 8014584/ZN33/2017-07
Appendix
9.6.6 Parameter Offset und Preset
The Offset parameter is overwritten when the preset function is triggered. Preset mode of operation, see
Section 13.1 “Preset”.
A Preset can be triggered with the “Class Instance Editor”:
 Description Set single Attribute
 Class 65
 Instance 1
 Attribute 13
 >Execute<-MessageExecution was completed
9.6.7 Sleep mode (Laser off)
The Sleep mode function can be activated with the “Class Instance Editor”:
Laser Off