SICK DME4000

Chapter 5 Operating Instructions
DME4000
88 © SICK AG • Germany • Subject to change without notice 8014584/ZN33/2017-07
Example
5 Example
5.1 Parameter Entry using the Example of “Code Entry”
All parameters can be set in this way.
Step 1
Connect the operating voltage.
Anzeige
Step 2
Call the “Code” menu with .
Display
Step 3
Call the “CODE 000” entry field with . The 1st digit blinks
Display
Step 4
Press 3x for the password “000” (only parameter view), enter the desired 1st digit
(e.g., “3”) with .
Display
Step 5
Advance one place with and enter the desired 2nd digit (e.g., “1”) with .
Display
Note