8014868/YEF7/2014-09-02 • © SICK AG • Subject to change without notice 19
Operating instructions Distance sensors Dx35
Structure and function
4.2 Function
The DS35 and DT35 distance sensors are opto-electronic sensors for
performing non-contact distance measurement of objects.
The DL35 and DR35 distance sensors are opto-electronic sensors for
performing non-contact distance measurement on reective tape.
If Q1 and Q2 are used as switching outputs, the following operation modes
are available: Distance to Object (DtO), Window (Wnd), and Object between
Sensor and Background (ObSB). The distance measurement value can be
transferred cyclically over IO-Link.
For the DT35 and DL35 models, the Q2 output can be congured as
a current output (4 … 20 mA), voltage output (0 … 10 V), or switching output.
To Next Page
Loading...
Need help?
General
