8014868/YEF7/2014-09-02 • © SICK AG • Subject to change without notice 51
Operating instructions Distance sensors Dx35
Cleaning and maintenance
11 Cleaning and maintenance
11.1 Cleaning
NOTICE
Equipment damage due to improper cleaning!
Improper cleaning may result in equipment damage.
For this reason:
• Never use cleaning agents containing aggressive
substances.
• Never use pointed objects for cleaning.
Clean the front screens at regular intervals with a lint-free cloth and plastic
cleaning agent.
The cleaning interval essentially depends on the ambient conditions.
11.2 Maintenance
The distance sensor requires the following maintenance work at regular
intervals:
Interval Maintenance work To be performed by
Cleaning interval depends
on ambient conditions and
climate
Clean housing. Specialist
Every 6 months depending
on the application
conditions with regard to
shock and vibration
Check the screw connections and plug connections. Specialist
Table 19: Maintenance schedule
12 Disposal
Please observe the following when disposing of the removal sensor:
• Do not dispose of the device along with household waste.
• Dispose of the device according to the applicable regulations in your
country.
To Next Page
Loading...
Need help?
General
