SICK GTE6 - Maintenance; Operating Instructions; Technical Data

NOTE
Disposal of batteries, electric and electronic devices
•
According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
•
The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
9 Maintenance
This SICK sensor is maintenance-free.
We do, however, recommend that the following activities are undertaken regularly:
•
Clean the optical interfaces and housing
•
Check the fittings and plug connectors
Cleaning
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
■
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
►
Clean the optical surfaces at regular intervals and, in the event of contamination,
with a lint-free lens cloth (part number 4003353). The cleaning interval essentially
depends on the ambient conditions.
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
10 Technical data
10.1 Technical specifications
The “Technical Data” section contains only an extract of the technical data of the sensor.
The complete technical data can be found on the homepage www.sick.com under the part number of the sensor.
Features
Sensing range
GTE6 GTE6-N1201S56 GTE6-N1201S94
Min. sensing range 20 ... 50mm 20 ... 45mm 15 ... 30mm
Sensing range max. 5 ... 110mm 5 ... 110mm 0 ... 70mm
Reference object Object with 90% remission factor (complies with standard white according to
DIN5033)
OPERATING INSTRUCTIONS
24
O P E R A T I N G I N S T R U C T I O N S | GTE6 - Line 8015312.1KOY/2023/10/10 | SICK
Subject to change without notice
en