SICK ISD400 Pro - 5 Mounting; 5.1 Mounting Procedure; 5.2 Mounting Instructions

8016441/2013-11-22•©SICKAG•Subjecttochangewithoutnotice 21
Mounting
5 Mounting
5.1 Mounting procedure
1. Chooseamountingsite,bearinginmindthemountinginstructions.
→Seethefollowingchapter.
2. Mountthealignmentbracketanddatatransmissionsystem.
→SeePage24,Chapter5.4.
3. Maketheelectricalconnection.
→SeePage26,Chapter6.
4. Alignthedevicesofthedatatransmissionsystemwithoneanother.
→SeePage31,Chapter7.1.
5.2 Mounting instructions
Toensuretrouble-freeoperation,thefollowingmountinginstructions
shouldbeobserved:
• Complywithtechnicaldatasuchasthemeasuringrange.
→SeePage44,Chapter11.2.
• Atlowambienttemperatures–e.g.indeep-freezewarehouses–the
datatransmissionsystemshouldhaveintegratedheating.
• Protectthedatatransmissionsystemfromdirectsunlight.
• Topreventcondensationwater,avoidexposingthedatatransmission
systemtorapidchangesintemperature.
• Makesurethesystemisasufcientdistancefromotheropticalmeasu-
ringdevicesanddatatransmissionsystems.→SeePage22,Chap-
ter5.3.