SICK ISD400 Pro - 8 Operating the Device; Handling Precautions; 8.2 Parameter and Option Selection

Operating the device
32 ©SICKAG•Subjecttochangewithoutnotice•8016441/2013-11-22
8 Operating the device
ATTENTION
Pushbutton damage due to improper handling.
Improperhandlingofthepushbuttonscandamagethem.
Thiswillmakeoperationdifcultorimpossible.
Forthisreason:
• Onlyoperatethepushbuttonswithyourngersora
suitablepointingdevice.
• Donotoperatethepushbuttonsusingsharporhard
objects.
8.1 Displaying the received signal level
Assoonasvoltageissuppliedtothedevice,thesignallevelisindicatedon
thedisplay.
8.2 Selecting parameters
Youcanselectamenu,parameter,oroptionusingthe , ,and
pushbuttons.Themenupathisspeciedintherelevantchapters.
→Fortheoverallmenustructure,seePage47,Chapter13.
8.3 Selecting options
1. Selectthedesiredparameterusingthe and pushbuttons.
2. Selectthedesiredoptionusingthe
or pushbutton.
3. Performoneofthefollowingsteps:
• Pressthe
pushbuttontosavethechange.
• Pressthe
pushbuttontocanceltheprocess.Theparameter
nameisdisplayedagain.
4. Performoneofthefollowingstepstoreturntothelevelindicator:
• Pressthe
pushbuttonrepeatedlyuntilthereceivedsignallevelis
displayedoncemore.
• Waitforapprox.2minutes.Thedisplaywillautomaticallyswitch
backtothereceivelevelindicatorifnobuttonsarepressed.Any
settingsyouhavemadewillalsobesaved.