SICK ISD400 Pro - 8.5.2 Menu Mode Navigation

8016441/2013-11-22•©SICKAG•Subjecttochangewithoutnotice 35
Operating the device
8.5.2 Menu mode
→Fortheoverallmenustructure,seePage47,Chapter13.
"Menu" menu Inthismenuanditssubmenus,youcanactivate/deactivateandcongure
themultifunctionalinputsMF1andMF2.
The"Align"menuisaccessedviathefollowingmenupath:
Operatingmode→
→Menu→ →Align
Pressthe
pushbutton.Theoptionthatiscurrentlysetisdisplayed.
Youcanscrollwithinthemenuusingthe
and pushbuttons.Press
the pushbuttontodisplaytherelevantparametervalue.
Parameter Description
Align Switchesthelaseroffforcommissioning.
MFxOn ActivatesordeactivatesthemultifunctionalinputsMF1and
MF2.
Options
•Enable:MultifunctionalinputsMF1andMF2areactivated.
•Disable:MultifunctionalinputsMF1andMF2aredeactiva-
ted.
Factory setting
Enable
MF1In Prerequisiteforthedisplay:"MFx"menu:"Enable"option
ActSta
SelectsthelevelofthemultifunctionalinputMF1.
Options
•ActLow:InputactiveatLOWlevel
•ActHi:InputactiveatHIGHlevel
Factory setting
•ActHi
LsrSw
Switchesthelaseron/off.
Options
•On
•Off
Factory setting
•On