SICK LFV 200

8 Supplement
8.1 Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
- Tuning fork 316L
- Mittenrauhwert Ra < 0.8 µm
- Process ttings 316L
Materials, non-wetted parts
- Housing 316L and plastic PEI
Process ttings
- Pipe thread, cylindrical
(DIN 3852-A)
G½, G¾, G1
- American pipe thread, conical
(ASME B1.20.1)
½ NPT, ¾ NPT, 1 NPT
- hygienic ttings Clamp 1", Clamp 1½", Clamp 2", PN 16 DIN 32676,
ISO 2852/316L, bolting DN 25 PN 40, bolting DN 40
PN 40, bolting DN 50 PN 25, SMS DN 38 PN 6
Weight approx. 250 g
Measuring accuracy
Hysteresis approx. 2 mm (0.08 in) with vertical installation
Switching delay approx. 500 ms (on/off)
Measuring frequency approx. 1100 Hz
Ambient conditions
Ambient temperature -40 … +70 °C
Storage and transport temperature -40 … +80 °C
Process conditions
Process pressure -1 … 64 bar
Process temperature -40 … +150 °C
Viscosity - dynamic 0.1 … 10000 mPa s
Flow velocity max. 6 m/s (with a viscosity of 10000 mPa s)
Density 0.7 … 2.5 g/cm³
Indication
Signal lamp (LED)
- Green Voltage supply on
- Yellow Vibrating element covered
- Red Fault
LFV 200 Subject to change without notice 19
Supplement
45821-01-130729