SICK PBS plus User Manual

Operating Instructions PBS plus
OPERATING INSTRUCTIONS PBS plus8024946 | SICK AG
Subject to change without notice
43
5. COMMISSIONING, OPERATION
5. Commissioning, operation
5.1 Checking device
Do a visual inspection of the pressure switch before commissioning.
 Escaping liquids indicate damage.
 Only use the pressure switch when its safety technology is working perfectly.
 Do an optical inspection for membrane damage, this is a safety-relevant part.
5.2 Requirements on the mounting location
The mounting location must fulll the following conditions:
 Protected from weather inuences.
 At high ambient temperatures and high UV radiation, the pressure switch must be installed
with additional shading to prevent damage to the digital display and pushbuttons.
 Sealing surfaces are clean and undamaged.
 Sufcient space for safe electrical installation.
 For information on threaded bore holes and weld-in connections, see the technical information
at www.SICK.de.
 Permissible ambient and measuring material temperatures remain within the performance
limits. Take into account possible restrictions on the ambient temperature range due to the
mating plug used.
 → For performance limits, see Chapter 9 “Technical data”.

SICK PBS plus Specifications

General

Brand	SICK
Model	PBS plus
Category	Switch
Language	English