Need help?Do you have a question about the SICK MSL Series and is the answer not in the manual?
General| Enclosure rating | IP67 |
|---|---|
| Protection class | III |
| Adjustment | Potentiometer |
| Supply voltage | 10 V DC ... 30 V DC |
| Operating voltage | 10 V DC ... 30 V DC |
| Output type | PNP |
| Housing material | Plastic |
| Ambient temperature | -25°C to +60°C |
Defines the applicability of operating instructions to the MSL photoelectric safety switch.
Describes applications for guarding hazardous areas on machinery or plant.
Specifies that the MSL/MSLZ may only be used as specified.
Outlines national/international regulations and responsibilities for safe installation and use.
Explains test purposes, pre-commissioning, expert, and daily testing procedures.
Details how to mount sender and receiver units using brackets.
Explains minimum distance required from reflective surfaces to the optical axis.
Describes how beam coding prevents interference and ambient light influences.
Covers the process of electrical installation for the device.
Guides on connecting sender/receiver units, including test input usage.
Details connection possibilities for adjusting the sender's operating range.
Explains how to change coding and select operating modes using DIP switches.
Describes how to switch on the device and its readiness for operation.
Guides on aligning sender and receiver units for optimal performance.
Details LED indicators and provides troubleshooting steps for issues.
Details technical specifications for the receiver unit, including supply connections and response times.
Lists operating modes, safety category, ambient conditions, and dimensions.
To Next Page
