SICK PBS Series

Operating Instructions PBS
44 ©SICKAG•Germany•Allrightsreserved•Subjecttochangewithoutnotice8013154/U275/2010/02/01
Functional test
 Open pressure connections only after the system is without pressure!
 Observetheambientandworkingconditionsoutlinedinsection7„Technical
data.
 Pleasemakesurethatthepressureswitchisonlyusedwithintheoverload
threshold limit at all times!
When touching the pressure switch, keep in mind that the surfaces of the instru-
ment components might get hot during operation.
The output signal must be proportional to the pressure. If not, this might point to a damage of
the diaphragm. In that case refer to chapter 9 „Troubleshooting“.
8. Maintenance, accessories / 9. Trouble shooting
8. Maintenance, accessories
Accessories:Mountingclamp(OrderNo.5322501),connectioncables
For details about the accessories (e. g. connectors), please refer to SICK‘s price list or contact our
sales department.
9. Trouble shooting
 Open pressure connections only after the system is without pressure!
 SICK pressure switches require no maintenance.
 Haverepairsperformedbythemanufactureronly.
Donotinsertanypointedorhardobjectsintothepressureportforcleaningtoprevent
damage to the diaphragm of the pressure connection.
 Takeprecautionswithregardtoremainingmediainremovedpressure
switches. Remaining media in the pressure port may be hazardous or
toxic!
 Removethepressureswitchfromserviceandmarkittopreventitfrombeing
used again accidentally, if it becomes damaged or unsafe for operation.
 Haverepairsperformedbythemanufactureronly.
Warning
Caution
Warning
Warning