Addendum Operating Instructions
S3000 in a narrow aisle
8012793/TL59/2010-01-29 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 3
Subject to change without notice
Contents
Contents
1 About this document.........................................................................................................4
2
Regulations to be observed..............................................................................................5
3 Operating conditions.........................................................................................................6
4 Installation and commissioning ......................................................................................7
4.1 Example for determining the angular error on the industrial truck....................7
4.2 Mounting of the S3000 ........................................................................................7
4.3 Operating mode of the S3000 .............................................................................8
4.4 Dimensioning of the protective field ....................................................................8
4.4.1 Required protective field length.........................................................9
4.4.2 Required protective field width ........................................................11
4.4.3 Example for the protective field configuration ................................11
4.4.4 Example for maximum usable protective field length and
stopping distance..............................................................................13
4.4.5 Example for protective field configuration for single-sided
narrow aisle situation .......................................................................13
4.5 Test object ...........................................................................................................15
4.6 Commissioning....................................................................................................15
4.7 Checking the system...........................................................................................15
4.8 Accessories..........................................................................................................15