Addendum Operating Instructions
S3000 PROFINET IO/IOOF
8013291/YY95/2016-02-05 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 3
Subject to change without notice
Contents
Contents
1 About this document.........................................................................................................5
2
On safety.............................................................................................................................6
2.1 Applications of the device.....................................................................................6
2.2 General safety notes and protective measures ..................................................6
3
Product description...........................................................................................................7
3.1 Special features ....................................................................................................7
3.2 Operating principle of the devices .......................................................................7
3.3 Input signals ..........................................................................................................8
3.3.1 Reset signals .......................................................................................8
3.3.2 Control signals for switching monitoring cases.................................8
3.3.3 Stand-by...............................................................................................9
3.3.4 Initialising ............................................................................................9
4 Mounting ..........................................................................................................................10
5 Electrical installation......................................................................................................11
5.1 System connection..............................................................................................11
5.1.1 Voltage supply ...................................................................................12
5.1.2 Network connection with RJ845-push-pull plug ...............................13
5.1.3 Network connection with SCRJ-push-pull plug (optical fiber) .........14
5.1.4 Local configuration connection ........................................................14
6 Configuration ...................................................................................................................15
6.1 Configuration PROFINET IO.................................................................................16
6.1.1 Reading the generic station description (GSDML) ..........................16
6.1.2 Configuring users ..............................................................................17
6.2 Configuration PROFIsafe.....................................................................................18
6.2.1 Setting the PROFIsafe address on the
S3000 PROFINET IO/IO8OF...............................................................20
6.2.2 Passivation and reintegration of the
S3000 PROFINET IO/IO8OF...............................................................21
6.3 Configuration of the S3000 PROFINET IO/IO8OF...............................................22
7 Diagnostics ......................................................................................................................23
7.1 Meaning of the status indicators .......................................................................23
7.1.1 Meaning of the LEDs.........................................................................23
7.1.2 Meaning of the 78segment display...................................................23
7.2 CDS (Configuration & Diagnostic Software) ......................................................26
7.3 Alarms..................................................................................................................27
7.3.1 I&M function (Identification & Maintenance function) ...................27
To Next Page
Loading...
Need help?
General
