SICK SIM800 User Manual

11 Technical data
NOTE
The relevant online product page for your product, including technical data, dimensional
drawing, and connection diagrams, can be downloaded, saved, and printed from the
Internet.
The page can be accessed via the SICK Product ID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).
Please note: This documentation may contain further technical data.
11.1 Features
Feature Parameter
Task Data recording, evaluation, and archiving
Supported devices
(excerpt)
Fixed mount barcode scanners, image-based code readers, RFID
read/write devices, photoelectric sensors
Technology Embedded hardware architecture:
•
Single-core 64-bit Arm® Cortex®-A53, Dual-core Arm® Cor‐
tex®-R5F
Software:
•
Can be programmed within the SICK AppSpace environment
•
SICK Interface & Algorithm API
Random Access Memory 512MB
Flash memory 5GB
programming software SICK AppStudio
Sensor data processing According to SICK Interface & Algorithm API
11.2 Interfaces
Feature Parameter
User interfaces Web server (GUI), SICK AppStudio (programming), SICK AppMan‐
ager (app installation, firmware update)
Data storage and retrieval Data logging via internal flash/RAM
SERIAL (RS-232)
Quantity 2
Function RS-232
Maximum data transmis‐
sion rate
115.2kBaud
Ethernet
Quantity 2
Function Data output, configuration, firmware update
Data transmission rate 10/100Mbit/s
Protocol TCP/IP
Digital inputs/outputs
Quantity “SERIAL, I/O” connection: 2 x digital input, 2 x digital output
“INPUT” connection: 1 x digital input
Details "Pin assignment", page 16
11 TECHNICAL DATA
24
O P E R A T I N G I N S T R U C T I O N S | SIM800 8028935//2023-09-26 | SICK
Subject to change without notice

SICK SIM800 Specifications

General

Brand	SICK
Model	SIM800
Category	Industrial Equipment
Language	English