Siemens 181

Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
Manual, 02/2014, A5E03573289-AD
5
Guide to documentation
1
Introduction
This modular documentation of the SIMATIC products covers diverse topics concerning your
automation system.
The complete documentation for the ET 200SP distributed I/O system consists of a system
manual, function manuals and product manuals.
The STEP 7 information system (online help) also supports you during the configuration and
programming of your automation system.
Overview of documentation for analog input module AI 4×RTD/TC 2-/3-/4-wire HF
The following table shows additional documentation that you need when using the
AI 4×RTD/TC 2-/3-/4-wire HF analog input module.
Table 1- 1 Documentation for analog input module AI 4×RTD/TC 2-/3-/4-wire HF
Topic
Documentation
Key contents
System description ET 200SP distributed I/O system
(http://support.automation.siemens.
com/WW/view/en/58649293)
system manual
• Application planning
• Installation
• Wiring
• Commissioning
Designing interference-
free controllers
Designing interference-free
controllers
(http://support.automation.siemens.
com/WW/view/en/59193566)
function manual
• Basics
• Electromagnetic compatibility
• Lightning protection
Analog value processing Function manual
Analog value processing
(http://support.automation.siemens.
com/WW/view/en/67989094)
• Basics of analog technology
(wiring, processing, installation
technology)
• Description/explanation of
meaning, e.g., conversion and
cycle times, basic error limits,
operational limits
System diagnostics Function manual
System diagnostics
(http://support.automation.siemens.
com/WW/view/en/59192926)
• Overview
• Diagnostics evaluation of
hardware/software