Siemens 181

Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
40 Manual, 02/2014, A5E03573289-AD
Technical specifications
6
6.1
Technical specifications
Technical specifications of AI 4×RTD/TC 2-/3-/4-wire HF
6ES7134-6JD00-0CA1
Product type designation
AI 4xRTD/TC 2-/3-/4-wire HF
General information
Firmware version
V2.0
Usable BaseUnits
BU type A0, A1
Product function
I&M data
Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal can be configured/integrated as of version
V12 SP1 / V13
STEP 7 can be configured/integrated as of version
V5.5 SP3 / V5.5 SP4
PROFIBUS as of GSD version/GSD revision
GSD revision 5
PROFINET as of GSD version/GSD revision
GSDML V2.3
CiR Configuration in RUN
Reconfiguration in RUN possible
Yes
Calibration in RUN possible
Yes
Installation type/mounting
Rack mounting possible
Yes
Front installation possible
Yes
Rail mounting possible
Yes
Wall/direct mounting possible
No
Supply voltage
Rated value (DC)
24 V
Valid range low limit (DC)
19.2 V
Valid range high limit (DC)
28.8 V
Reverse polarity protection
Yes
Input current
Current consumption, max.
35 mA
Power loss
Power loss, typ.
0.75 W
Address area
Address space per module
Address space per module, max.
8 bytes; + 1 byte for QI information