Siemens 181 - Accessories

Product overview
2.1 Properties
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
8 Manual, 02/2014, A5E03573289-AD
Properties
The module has the following technical properties:
● Analog input module with 4 inputs
● Resolution: Up to 16 bits including sign
● Voltage measurement type can be set per channel
● Resistor measurement type can be set per channel
● Thermal resistor (RTD) measurement type can be set per channel
● Thermocouple (TC) measurement type can be set per channel
● Configurable diagnostics for each channel
● Hardware interrupt on limit violation can be set per channel (two high and two low limits
per channel)
● Automatic compensation of the line resistance with 3-wire connection
The module supports the following functions:
● Firmware update
● I&M identification data
● Reconfiguration in RUN
Table 2- 1 Version dependencies of other module functions
Function
Product version of
the module as of
Firmware version of
the module as of
Calibration in runtime
1
as of V2.00.00
Value status (PROFINET IO only)
1
as of V1.01.00
Scalable measuring range
1
as of V2.00.00
Selectable conductor resistance for 2-wire connection
1
as of V2.00.00
Switchable wire break check
1
as of V2.00.00
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connection