Then align the insulator column so that pegging out with the bolt 10.9 (Fig. 49) is possible.
Now tighten the four M 16x65 screws to a torque of 170 Nm.
Tighten the four M8x40 screws and nuts with a torque of20Nm.
16.7
15.16.3
1002226a
Fl Humidity indicator
N Groove for teflon strip 16.6.1
VD Packaging cap
1 Transport protection device
15.16.3 Desiccant agent
16 Post insulator
16.7 Sealing ring
16.9 Operating rod
1.8 Lifting eye-bolt
2 Cable fastener
Fig. 38 Packaging cap for insulator column
57
To Next Page
Loading...
