4 Installation
Fig. 39 Humidity indicator
The old desiccant agent is removed and disposed of.
Treatment of the sealing flanges and the guide
The sealing faces of the flanges and the guide must be treated carefully since even minor damage may lead to
leaking joints.
59
A Grease with corrosion protection agent WD 40 or Trost
multifunction oil
B Grease with Tectyl 506
C Grease sealing rings with Vaseline 8420
Fig. 40 Treatment of the sealing flanges and the guide
The flange for the insulator column should also be cleaned and treated with Tectyl.
Take two new O-rings from the accessory kit, clean with lint-free cloth, lubricate with Vaseline and lay out ready
for use.
To Next Page
Loading...
