Siemens 9200 - Quick Install; Before You Begin; Options Card Combinations

6
Quick Install
This section can be used by a licensed electrician to install and perform basic
meter setup. For more detailed meter setup and use instructions, see the
“Using the Meter” section in this guide.
Before You Begin
1. Familiarize yourself with the steps in this Quick Install section and read
the safety precautions presented on the “Installation Considerations”
page.
2. Check that you have received all the correct parts for your meter. Ensure
that you have the correct Options Card by comparing it to the following
table.
Options Card Combinations
1
This is the code number displayed on the meter Options Code screen.
2
This is the part number used to order the meter.
AOBOP
11
THIS SIDE UP
AOBOP
11
Part number
suffix
Options code
Options Card
Options Code
1
Part Number Suffix
2
Description
7 A0A0N Standard Measurements, RS-485
8 A0A0P Enhanced Package #1, RS-485
9 A0A0R Enhanced Package #2, RS-485
10 A0B0N Standard Measurements, two pulse outputs, RS-485
11 A0B0P Enhanced Package #1, two pulse outputs, RS-485
12 A0B0R Enhanced Package #2, two pulse outputs, RS-485