Siemens 9200 - Step 10: Verify Meter Operation; Integrated Model, RMD Model; TRAN Model without RMD

21
Step 10: Verify Meter Operation
Integrated Model, RMD Model
Ensure that the meter is receiving power, and that the display shows
meaningful values.
TRAN Model without RMD
Ensure that the meter is receiving power, and that the LED located below the
3-position power supply connector flashes once per second.
If your meter is not operating properly, consult the Siemens Support web site
at http://pwrm.com/support/ for troubleshooting tips and frequently asked
questions.
LED flashes once per
second when the
TRAN is operating