How to fix Siemens 9410 remote display communication issues?
If your remote display cannot communicate with your meter, check the connection between the meter and the display. Also, verify the meter’s status LED to ensure it is operating normally.
What to do if Siemens Measuring Instruments remote display needs a firmware update?
If your remote display needs updated firmware for compatibility with your meter, update the firmware of your remote display.
General| Type | Ultrasonic flow meter |
|---|---|
| Accuracy | ±1% of reading |
| Operating Temperature | -20 to +60°C |
| Display | LCD with backlight |
| Power Supply | 100 to 240 VAC or 24 VDC |
| Output | 4-20 mA, pulse |
| Communication | Modbus, HART |
| Resolution | 0.001 m/s |
| Weight | Varies depending on model |
Procedures for configuring basic metering parameters via the display.
Recommendations for creating and managing secure passwords.
Steps involved in configuring the meter's security settings.
Details on setting up and using Ethernet for meter communication.
Steps to set date, time, and synchronization parameters via display.
Information on updating meter firmware and templates.
Procedure for updating firmware using the ION Setup software.
Configuration and application of analog input modules.
Configuration and application of digital output modules.
Procedures for configuring and managing meter alarms.
Information on performing various meter resets.
Procedure and purpose of revenue locking the meter.
To Next Page