9410 series Meter overview
Email messaging feature
You can configure your meter to automatically email information, whether notification
of a high-priority event or a regularly scheduled send of logged data, to an external
email address.
Specify the type of event that triggers an email alert, such as a power quality
disturbances or interval for logged data. Email messages from your meter are received
like any other email message.
Supported protocols
Your meter’s fundamental protocol and architecture is ION.
You can integrate the meter into various industry-standard networks. Data that the
meter measures can be made available to other devices using Modbus, DNP 3.0 and
SNMP as well as the MV-90 translation system. You can configure the meter to import
data from other devices on these networks. Your meter supports the IEC 61850
protocol and COMTRADE waveform data format.
Your meter also supports IPv6, DPWS and RSTP Ethernet protocols.
Related Topics
• Protocols, ports and connections
ION Setup device configuration tool
ION Setup is a free configuration tool for your meter that allows you to remotely
configure your meter’s features over Ethernet or serial communications.
• Use the setup screens to guide you through the process of configuring your meter.
• Use the real-time data screens to verify your meter’s configuration.
• Use the data screens to view your meter’s recorded data.
• Use the charting function to view your meter’s recorded waveforms.
You can download ION Setup from www.usa.siemens.com/pds.
See the online ION Setup help, available from www.usa.siemens.com/pds, for
instructions on connecting to your meter.
Meter types
The 9410 series is available in two physical form factors, and has several accessories.
Model Commercial reference Description
9410DC US2:9410DC Panel-mounted meter with integrated display
9410D24VDC US2:9410D24VDC Same as the 9410DC, except with low-voltage DC
control power
9410TC US2:9410TC DIN rail-mounted meter without display, which can
be connected to a remote display
9410T24VDC US2:9410T24VDC Same as the 9410TC, except with low-voltage DC
control power
9410RC US2:9410RC DIN rail-mounted meter packaged with a remote
display
16 7EN05-0336-03
To Next Page
Loading...
Need help?
General
