Alarms and alerts 9410 series
Parameter Description
Ack The date and time when the alarm was acknowledged (only applies to
acknowledged alarms).
Value Active alarm: The maximum value detected when the alarm was triggered.
Historic alarm: The maximum value detected during the duration of the alarm.
Viewing and acknowledging alarms using the meter’s display
You can view and acknowledge alarms using your meter’s display
1. Press the home button to display your meter’s data screen menu.
2. Navigate to Alarms > Active Alarms to view and acknowledge active alarms, or
navigate to Alarms > Historic Alarms to view and acknowledge alarms that are
no longer active.
3. Use the up and down arrows to view the different alarms. Press the info button to
view details of the selected alarm.
4. To acknowledge all active or historic alarms, press the up and down arrow button
simultaneously. A green checkmark appears by the acknowledged alarms, and
the alarm indictors are updated.
Alarm configuration
Disabling alarms through your meter’s display
You can disable alarms through the meter’s display when you are performing
maintenance tasks on your system and want to prevent nuisance alarms.
NOTE: To stop an alarm from being displayed without impacting other metering
features, set the alarm priority to Info Only.
WARNING
INACCURATE DATA RESULTS
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
Confirm your alarm is properly configured.
1. Navigate to Setup Menu > Alarm Setup. Press the edit button to access the
enable/disable screen. Use the up and down arrows to scroll through the available
alarms. Simultaneously press the up and down arrow to enable or disable the
highlighted alarm.
2. Press the select button to confirm your settings.
3. Complete the system maintenance tasks.
7EN05-0336-03 155
To Next Page
Loading...
Need help?
General
