Meter display 9410 series
6. Press to confirm, and the new setting is applied to your meter. Press to
cancel and maintain your meter’s original setting.
7. In the Volts Mode screen, press to go to the PT/CT Setup screen.
8. In the PT/CT Setup screen, press
to highlight the potential transformer
(PT) or current transformer (CT) value for editing. Press
to edit the highlighted
value.
NOTE: If you have exceeded the password timeout period, you are prompted
to enter your meter’s display password.
9. Press to change the value of the highlighted digit (0 - 9). Press to go to the
next digit. Press
to enter the new value. When the confirmation screen is
displayed, press
to confirm the new value or to revert to the original value.
Related Topics
• Minimum configuration requirements for basic metering
Using the onscreen keyboard
Use the onscreen keyboard to provide login credentials on your meter’s display.
When advanced security has been enabled on your device through ION Setup, many
functions require you to provide your advanced security username and password. Use
the onscreen keyboard to provide these credentials.
When you access a feature that requires your username and password, the onscreen
keyboard appears.
7EN05-0336-03 37